Axceleron

Our LED downlight fixture combines state-of-the art features with superior performance and offers a myriad of options, aimed at meeting each and every lighting need all while considering cost effectiveness and energy efficiency.

Download Specifications
Axceleron PDF
Axceleron IES

Featured Functionality

With unending applications, the Axceleron’s vast and customizable functionality can be tailored to fit any need. The Axceleron is the ideal downlight for theaters, houses of worship, academic institutions, convention centers and more.

  • 1 of 3
  • 2 of 3
  • 3 of 3

Axceleron Benefits

  • 60+% less energy per lumen than standard lighting
  • Virtually no maintenance
  • Elegant, smooth dimming curve down to 0%
  • Passive Cooling, Ultra-efficient heat sink, eliminating on-board fans, even at 15,000-lumen output for silent operation
  • Critical components are run below peak output for longer life
  • IP20 Rated
  • Several built in dimming curves

Axceleron Options

  • Wattages available up to 150W
  • Standard color temperatures of 3,000K, 4,000K and 5,000K are available; additional color temperatures can be special ordered
  • Standard CRI of 80; 90 CRI can be special ordered for choices below 4,000K
  • Beam angle options: 14, 18, 28, 36, 54, 70, 110, Asymmetric (27×61), and wall wash
  • DMX/RDM, 0-10V, Line voltage dimming or Constant control
  • DMX/RDM Compliant
  • DMX comes standard with a RJ45 in/out connector for control. Other options available for DMX control are XLR-5 Pin, Screw Terminal or an IDC card.
  • Mounting options include C-clamp, Wall Bracket, Yoke, Pendant (up to 42° swivel), Air Craft Cable, and Flat / Sloped Ceiling Recessed Kits. Please note that at this time our sloped recessed kit is for accessible ceilings only
  • Off-white or black housing come standard but custom options are available.

These are our standard specifications, for customization needs please contact us.

Axceleron Specifications

Typical Installations
  • Theatres and Performing Arts Centers
  • Houses of Worship
  • Convention Centers, Arenas and Exhibit Halls
  • Automobile Showrooms
  • Museums
  • Academic Institutions – Auditoriums, Lecture Halls
  • Retail Stores and Atriums
  • Airport Corridors and Terminals
  • Optimum Installation Heights: 25ft (7.6m) to 50ft (15.2m)
LEDs, Optic and Output
  • 3000K, 4000K or 5000K color temperatures.
  • 80 CRI standard for 3000K
  • 75 CRI standard for 4000K to 5000K
  • 90 CRI available for LEDs
  • 14, 18, 28, 36, 54, 70, 110, Asymmetric (27×61), and Wall Wash degree beam angles
  • 12,000 lumen output at 3000K (@ 150W input)
  • 15,000 lumen output at 5000K (@ 150W input)
Physical
  • 9.75in (247.6mm) diameter
  • 14.57in (370.0mm) length
  • Unit weight: 10lbs (4.5kg) without mountings
  • High performance LED engine, driver and power supplies
  • No noise with efficient passive cooling (no internal fans)
  • All aluminum construction
  • Standard black and off-white housing colors available in matte, semi-gloss, or glossy finishes
Options
  • Custom RAL color housings
  • Custom housing graphics
  • Brushed aluminum housing
  • Mounting options include: C-clamp, Wall Bracket, Yoke, Pendant (up to 42° swivel), Air Craft Cable, and Flat / Sloped Ceiling Recessed Kits.
  • Concentric Ring and Hexagonal Glare Reducers
  • DMX Connectors: RJ45 (standard), XLR 5-PIN, Screw Terminal, and IDC
Electrical
  • Available Wattages: 75W, 100W, 125W, 150W
  • 90-264 VAC, 50/60Hz
  • L70 rating > 36,000 hours
  • IP20 Rated
  • ETL listed to UL and cUL standards
  • Rated for non-IC (Insulation Contact) Environments
Controls
  • DMX/RDM
  • 0-10V Analog
  • Line Voltage Dimming (Mains Dimming)
  • Constant
  • Dimmable units match incandescent dimming with smooth fading to and from 0%

Other Products

Rheos

Caprius

Zino

Vianite

Tsoris

Find a Representative

We’re Here to Help

Find an Aquarii representative near you.


Aquarii Representatives in your area

Ready to start?

Contact Us